Mounting Sk-GH10 to a tripod
The SK-GH10 require a 3/8" mounting stud, if you tripod has a smaller 1/4"mounting atud,check to see if it is a reversible stud with 3/8"-16 threaded section on the end.if so,reverse the stud and use the 3/8" end of the stud.if the 1/4" stud is not reversible,you will need to use a reducer bushing to mount the head to the tripod.
Step1:Firmly tighten the Pan Knob(5)
Step2:
Position the head with the spool mounting hole(located under the spool)directly over the threaded tripod mounting stud.It is important to keep the head completely straight(vertical)over the stud to keep the spool threads from cross threading
Step3:Screw the head clockwise onto the stud of your tripod until it seats the bottom spool of the head and the tripod mounting plate.Loosen the Pan Knob(5)Slightly and rotate the head to check the security of the mount.
The spool should not loosen when you turn the head counter-clockwise ,and the head should not wobble at all.