How to make and use a dslr camera slider

　　Sevenoak SK-HD75 series heavy-duty Camera slider are designed to give you the ability to create highquality videos without over-extending your budget. It futures heavy-duty Aluminum construction, height adjustable and foldable feet, 1/4” and 3/8” screw thread, precision bearings etc. It can be used standalone with the included feet whose height can be adjusted easily, or attached directly to tripod(s) with the built-in screw thread. With precision bearings built under the sliding plate, the camera motion is smoother and quieter than ever. Take out this unit from the packaging, attach the camera mounting platform to the slide rail as shown in the below.

　　The features about camera slider Built with precision bearings

　　● Built-in spirit level

　　● With tension adjustment/locking knob

　　● Height adjustable and foldable feet

　　● Moves smoothly and quietly

　　● Heavy-duty Aluminum construction

　　● Can be used standalone or mounted on tripod(s)

　　● Built-in 1/4” and 3/8” screw holes on the rail

　　● Available length and max load capacity

　　1.1 Adjust the tightness of the camera mounting platform

　　Note: The tightness of the camera mounting platform is set before shipment, only adjust it if you think there is gap between the camera mounting platform and slide rail.
 

　　Attach the camera mounting platform to the slide rail,check if the camera mounting platform fits well with the slide rail. If there is gap between the camera mounting platform and the slide rail, please adjust the tightness of the camera mounting platform before you start.

　　1.2 Loosen the screws on the camera mounting platform as shown in the below figure, use thumb and forefin-ger to press the bearing and side of the slide rail, make sure the surface of the bearing touches the surface of the slide rail, then fix the screws on the camera mounting platform.
 

　　1.3 Slider the camera mounting platform to the other side of the slide rail, loosen the screws on the camera mounting plat-form as shown in the below figure, press the bearing with thumb and press the slide rail with forefinger, make sure the surface of the bearing touches the surface of the slide rail, then fix the screws on the camera mounting platform.

　　1.4 Check if the camera mounting platform fits well with the slide rail, if it is, you are ready to go to the next step.

　　2. Attach one of the foot to one end of the sliding rail first,tighten the locking screw. Then attach the other foot to the other end of the sliding rail, tighten the locking screw.

　　3. Adjust the height of the feet with the included screws on the feet, then tighten the screws to make the slider stable and steady.

　　4. Mount the ball head (not included) /camera onto camera mounting platform securely, loosen the screw on the camera mounting platform a bit to make sure the camera mounting platform can move smoothly.

      More information about sevenoak camera slider,camera stabilizer