Affordable Pieces of camera slider give you stable video

　　Insert the camera mounting platform onto the carbon fiber tubes as shown in figure 2. If the camera mounting platform is not able to be inserted onto the tubes, unscrew the two screws on the rotating plate as shown in figure 1.Rotate the plate clockwise to ensure the tubes can go through, then rotate the plate counter-clockwise till the wheels and the tubes are in proper position, tighten the screws.

　　The rotating plate on camera mounting platform is adjustable, and it is designed to adjust the position of the bearings on the rotating plate.
 

　　2. Loosen the locking screws on the support feet, unfold the legs, then tighten the locking screws on the support feet.

　　3. Loosen the tube fixer locking screw as shown below , insert one of the tube fixer to one side of the tubes as shown below, then tighten the tube fixer locking screw.
 

　　4. Loosen the tube fixer screw as shown below, insert the other tube fixer to the other side of the tubes as shown below, then tighten the tube fixer locking screw.
 

　　5. Adjust the height/angle of the feet according to your desire, then fix the screws.You can add a tripod ball head (purchased separately) on to the camera mounting platform which will allow you to adjust the angle/position of the camera conveniently,then mount the camera onto the tripod ball head, it is ready to start shooting now.
 

　　6. You can use SK-CFS80 camera slider standalone, or you can mount it on a tripod or two tripods as shown below, you can even use it vertically as shown below.

　　Features

　　1. Carbon fiber and aluminum construction

　　2. Light weight and durable

　　3. Quiet and smooth movement

　　4. Foldable supporting feet

　　5. Built-in screw socket on carbon fiber tubes

　　6. Built-in 1/4” and 3/8” threaded screw holes

　　7. Extandable with extra carbon fiber tubes(sold separately)

　　More information About sevenoak camera rig,camera stabilizer