Should I Buy It?Professional camera stabilizer provider-sevenoak

The Sevenoak SK-SW01N is a series of precision and professional hand-held camera stabilizer system designed for camcorders and SLR cameras. It features with flexible handle grip, three-axis gimbal, addablecounterweight disks

The Sevenoak SK-SW01N is a series of precision and professional hand-held camera stabilizer system designed for camcorders and SLR cameras. It features with flexible handle grip, three-axis gimbal, addablecounterweight disks, fore-and-aft trim screw,side-to-side trim screw, quick release camera mounting platform etc. This camera stabilizing system works so well that it allows you to get that, incredibly smooth and graceful, steady shot even while going to extremes like running up and down stairs.

By trimming the fore-and-aft trim screw and side-to-side trim screw, the camera platform can be moved back and forth, and side to side to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform or by changing the lenght of the no-tools telescoping Central post, the camera's vertical balance can be adjusted.
 

camera stabilizer

1.Take out the camera mounting plate by loosening the camera mounting plate locking screws.

2.Attach the camera to the mounting plate using the supplied screw ,make sure camera is securely fastened.

3.mount the camera and camera mounting plate onto the platform,tighten the camera mounting plate locking screws .make sure the center gravity of the camera is align with center line of the center post.

4.Locate the longitudinal center of gravity

Adjust accurately and tighten the height adjustment screw until it's complately secured,swing and test if it is balanced.Hold the hand grip of the steadycam pros,then release the steadycam pros from horizontal position and let it drop to a vertical position.Adjust the length of the center post and make sure the dropping time is within 1-3 senconds .if you are using a heavier camera,you will need to adjust the length of the center post.

5.Adjust front-to-back balance

Unlock the camera mounting plate locking screws by turning them clockwise,turn the front-to-back trim screw clockwise,the camera and platform moves forward.Turn the front-to back trim screw counterclockwise,the camera and platform moves backward.

6.adjust the left and right balance

Loosen the bottom plate locking screw by turning them clockwise,turn the side-to side trim screw clockwise,the camera and platform moves to the right side.turn the side-to-side trim screw counterclockwise,the camera and platform moves to the left side,After adjusting the balance go back to step 4,make sure that the dropping time is within 1-3seconds if so ,you are now ready to start filming.
 

The Sevenoak SK-SW01N is a series of precision and professional hand-held camera stabilizer system designed for camcorders and SLR cameras. It features with flexible handle grip, three-axis gimbal, addablecounterweight disks, fore-and-aft trim screw,side-to-side trim screw, quick release camera mounting platform etc. This camera stabilizing system works so well that it allows you to get that, incredibly smooth and graceful, steady shot even while going to extremes like running up and down stairs.

By trimming the fore-and-aft trim screw and side-to-side trim screw, the camera platform can be moved back and forth, and side to side to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform or by changing the lenght of the no-tools telescoping Central post, the camera's vertical balance can be adjusted.
 

camera stabilizer

1.Take out the camera mounting plate by loosening the camera mounting plate locking screws.

2.Attach the camera to the mounting plate using the supplied screw ,make sure camera is securely fastened.

3.mount the camera and camera mounting plate onto the platform,tighten the camera mounting plate locking screws .make sure the center gravity of the camera is align with center line of the center post.

4.Locate the longitudinal center of gravity

Adjust accurately and tighten the height adjustment screw until it's complately secured,swing and test if it is balanced.Hold the hand grip of the steadycam pros,then release the steadycam pros from horizontal position and let it drop to a vertical position.Adjust the length of the center post and make sure the dropping time is within 1-3 senconds .if you are using a heavier camera,you will need to adjust the length of the center post.

5.Adjust front-to-back balance

Unlock the camera mounting plate locking screws by turning them clockwise,turn the front-to-back trim screw clockwise,the camera and platform moves forward.Turn the front-to back trim screw counterclockwise,the camera and platform moves backward.

6.adjust the left and right balance

Loosen the bottom plate locking screw by turning them clockwise,turn the side-to side trim screw clockwise,the camera and platform moves to the right side.turn the side-to-side trim screw counterclockwise,the camera and platform moves to the left side,After adjusting the balance go back to step 4,make sure that the dropping time is within 1-3seconds if so ,you are now ready to start filming

More about sevenoak other product :cheap camera slider,camera rig

Get in Touch With the Latest From Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak
Sevenoak